Build a gas forge 2015-CLASS IS FULL!

Gas forge

This is a one day workshop during which we will make a venturi burner style gas forge. The forge will be a single burner model. The body will be approximately 10” diameter by 12” deep, made from a round steel tube. This forge will be insulated with a 1” blanket of ceramic fiber, coated with a cementuous finish by participants at home after the class. Fire brick will be used for the floor and sliding doors on each end, making it possible to pass the stock through, to heat the center of a work piece. The forge is fastened to a saddle, and can be bolted to a table surface for stability. Most of the fabrication for these forges will be done prior to class by the instructor. This forge is a simple, economical forge that is easy to transport and fun to use.

NOTE: The cost  will be from $180.00 – $200.00. At the time of this publication, all the parts have not been procured yet. Final price will be determined in the May issue of the Forum, and/or by contact with participating members.

Class size: Class will require a minimum of 6 students, and a maximum of 8. Anyone registering after the 8 person will be put on a waiting list in order of registration receipt in the event of a cancellation.

Location: Class will be at held at Jim Moenck’s shop, located at 2078 120^th Ave., Dresser, WI 54009. From the Twin Cities, take I35 north to Forest Lake to Hwy 8 East. Go across the St. Croix river into WI about 3 miles. Turn south on 208^th, which is at the round-a-bout by Menards. Go south 1 mile. 2078 is on your left just after the curve. If you see a lake on your right, you went too far. Use the gravel driveway (just south of the blacktop driveway) to the shop. An anvil sign will mark the driveway.

Tools and Equipment or other items participants are to bring to the class: Minimal tooling will be required. Students will be contacted prior to class if they need to bring any tools.

Safety Equipment – Safety glasses & ear plugs are mandatory. Other safety equipment includes: a respirator if you have one, cotton clothing, gloves, leather apron, and leather boots or shoes that come up over your ankle. If you do not have a respirator, 3M masks will be provided.

Lunch Arrangements: Bring you own lunch, or eat at a local establishment. There are several spots to eat east of Menards on Hwy 8. There is a microwave in the shop you can use to warm up food if you would like to. Bring your own beverages to stay hydrated during the day (non-alcoholic, of course).

Register by sending your contact information to:
Jim Moenck
2078 120th Ave
Dresser WI  54009
Registration priority is determined by the date on your postmark.

Contact Jim with questions:
715-483-5054
jrmoenck@yahoo.com