2014 Build a Gas Forge

Gas forge

This is a one day workshop in which we will make a Venturi burner style gas forge.  The forge will be a single burner model.  The body will be approximately 10″ diameter by 12″ deep, made from a round steel tube.  This forge will be insulated with a 1″ blanket of ceramic fiber, coated with a cementuous finish for durability.  Fire brick will be used for the floor and sliding doors on each end, making it possible to pass the stock through, to heat the center of a work piece.  The forge sits in a saddle, and it bolted to it for stability.  This forge is a simple, economical forge that is easy to transport and fun to use.

Class will be at held at Jim Moenck’s new shop.  It is located at 2078 120th Ave., Dresser, WI  54009.  From the Twin Cities, take I35 north to Forest Lake to Hwy 8 East.  Go across the St. Croix river into WI about 3 miles.  Turn south on 208th, which is at the round-a-bout by Menards.  Go south 1 mile.  2078 is on your left just after the curve.  If you see a lake on your right, you went too far.  Use the gravel driveway to the shop.  An anvil sign will mark the driveway.

Tools and Equipment or other items participants are to bring to the class: Minimal tooling will be required.  Students will be contacted prior to class if they need to bring any tools.
Safety Equipment: – Safety glasses & ear plugs are mandatory.  Other safety equipment includes: a respirator if you have one, cotton clothing, gloves, leather apron, and leather boots or shoes that come up over your ankle.
Lunch Arrangements: Bring your own lunch, or eat at a local establishment. There are several spots to eat east of Menards on Hwy 8. There is a microwave in the shop you can use to warm up food if you would like to. Bring your own beverages to stay hydrated during the day (non-alcoholic, of course).
To register for this class, send a check written to “Guild of Metalsmiths” for $175 to:

Jim Moenck
2078  120th Ave
Dresser WI 54009